BX ring type joint gasket refers to the metal gasket of BX-shaped section by processing metal materials. It is of pressure energized seal
in radial direction, one special kind of octagonal metal ring gaskets. It has good sealing as the contact between gasket and the ring joint
faces, especially the outside face, and is pressed tightly to keep good sealing performance.
BX ring type joint gasketis installed inside the ring joint groove of flange face. When the connecting bolt is fastened, it is compressed
in axis direction andispressed close to the upper and lower ring joint grooves, which result in the plastic deformation to create the seal.
After pressure is raised, ring gasket expandsin radial direction under the force of media pressure. The gasket sticks more tightly to the
bevel face of ring joint groove to formself-tightening. However, therise of media pressure will deform the flange and connecting bolt, it
will cause the relative separation between the sealingsurfaces, and the sealing ratio ofgaskets is reduced accordingly. BX ring type
joint gasket is one kind of pressure energized ring gaskets.
Note: When octagonal type is chosen, the material hardness of the pad should be 15~20HB lower than that of the flange face. It is
recommended the pad is not recycled.
Applicable standards:
ANSI B16.5-1973 、 JPI-75-15-70 、 GB 699 、 GB1220 、 JB755 、 HG20633-97
BX Ring Joint Gasket Drawings:
Main materials parameters:
|
Material |
Maximum hardness BRINELL |
Temperature（ ℃ ） |
Abbreviations |
|
|
Brucellosis |
Rockwell |
|||
|
Soft Iron |
90 |
56 |
-60 500 |
D |
|
Low Carbon Steel |
120 |
68 |
-40～540 |
S |
|
304SS |
160 |
83 |
-250 540 |
304 |
|
304LSS |
160 |
83 |
-250 540 |
304L |
|
316SS |
160 |
83 |
-200 815 |
316 |
|
316LSS |
160 |
83 |
-200 815 |
316 |
|
321SS |
160 |
83 |
-200 870 |
321 |
|
347SS |
160 |
83 |
-200 870 |
347 |
|
410SS |
170 |
86 |
-40 850 |
410 |
|
5Cr-0.5Mo |
130 |
|
-29 650 |
|
|
Copper |
80 |
|
-100 315 |
|
|
Aluminum |
35 |
|
-200 425 |
|
|
Inconel 600 |
150 |
|
-100 1095 |
|
|
Incoloy 825 |
150 |
|
-100 1095 |
|
|
Monel 400 |
150 |
|
-100 760 |
|
|
Titanium |
215 |
|
-200 540 |
|
|
Nickel 200 - |
110 |
|
200 760 |
|
|
Hastelloy B2 |
230 |
|
-100 1095 |
|
|
Hastelloy C276 |
210 |
|
-100 1095 |
|
Why Choose US
1. Professional
We provide OEM, ODM of Ring joint gaskets for our customers worldwide, highly praised by our customers
2. High quality guarantee.
We strictly carry out ISO quality management system for all production process and raw material incoming.
3. High Quality Material Quarantee
All of our products are high quality material according ASTM
4.After service
24 Hours x 7 days after service
5. Factory Price with Samll MOQ
We promise factory low price with small MOQ.
6.Timely Delivery
For prototype tooling sample lead time 3~7 days
For production tooling lead time 10-15 days
For order 7-15 days according to quantity
